Rockford Fosgate Punch Marine Pm600x4 4 Channel Amplifier 75x4 At 4 Ohms

Rockford Fosgate

$559.99 
SKU: ROCPM600X4

Sorry, this item is out of stock

Rockford Fosgate PM600X4 Punch Marine 600 Watt 4-Channel Amplifier

Model: PM600X4
  • High level input capable with Auto Turn-On circuit
  • Marine grade stainless steel hardware
  • Features C.L.E.A.N. Set-up
  • Marine grade two part epoxy coating on circuit boards
  • 12dB/octave Butterworth crossover
  • On-board Punch EQ with +18dB boost @ 45Hz
  • Muted turn on
  • Stealth top mounted control panel
  • Cast aluminum heatsink
  • Short circuit protection
  • Over current protection
  • 2-Year Warranty
  • Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)

The PM600X4 is a 600 Watt 4-channel amplifier with high dynamic power using Class-a/b technology and a conformal coated pc board designed for motorsport and marine applications.

The Punch PM600X4 multi-channel amplifier is versatile to power any audio system configuration. In addition to 4-channel stereo mode, you can bridge both channels to create a high power 2-channel amp, or run stereo speakers on the front with subwoofers on the rear in 3-channel mode. The variable HP/LP crossover and built-in Punch EQ allows for precise tuning of Bass frequencies and the Pass-Thru RCA jacks provide flexibility as your system grows and keeping Y-adapters to a minimum.

Specifications
Number of Channels 4
Total Power 600 Watts
Rated Power 75 Watts x 4 @ 4-Ohm
150 Watts x 4 @ 2-Ohm
300 Watts x 2 @ 4-Ohm Bridged
Dynamic Power 129 Watts x 4 @ 4-Ohms 0° Res
211 Watts x 4 @ 2-Ohms 0° Res
Bridgeable Yes
Frequency Response 20Hz to 20kHz +/- 1.0dB
Input Sensitivity 150 mV - 12 V
Circuit Topology Class Class A/B
Efficiency 68% @ 4-Ohm
Total Harmonic Distortion (THD+Noise) 4-Ohm: <1.0%
2-Ohm: <1.0%
Signal Input Hi/Low level: 2 RCA pair
Tone Controls Front Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
Front Punch EQ2 Treble: 0dB to +12.5dB @ 12kHz
Rear Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
Rear Punch EQ2 Treble: 0dB to +12.5dB @ 12kHz Function depends upon LP/AP/HP switch position
Crossover Controls Front/Rear High-Pass (HP): 50Hz-250Hz @ 12dB/octave Butterworth
Front/Rear Low-Pass (HP): 50Hz-250Hz 12dB/octave Butterworth
All-Pass; Yess
Remote Controls Optional Punch Level Control (PLC2) Ready
Power Wire Gauge 4 AWG
Power Input Connector Captive C-Clamp
Speaker Wire Gauge 8 AWG to 18 AWG
Speaker Output Connector Captive C-Clamp
Cooling Convection
Operating Voltage 9 - 16 VDC
Recommended Fuse 100A
Average Current Draw (13.8V Music) 45A
Max. Current Draw (13.8V Sinewave) 90A
Suggested Alternator 75 A
Dimensions (H x W x D) 2.38 x 7.76 x 13.28 (in)

What's in the Box:
  • Punch Amplifier
  • Mounting Hardware
  • Allen Wrench
  • Quick Setup Guide

Brands